Artwork Care Instructions

CARE INSTRUCTIONS FOR YOUR ARCHIVAL PIGMENT PRINT
All of my artwork is printed with love and care, on the best materials available. They’re precious, and with the correct care will last a lifetime.

Key tips:

• Try to keep handling to an absolute minimum. If you handle your print, try to do so only by the edges/handling margin. Always avoid touching the printed area, as fingerprints can leave a mark.

• Use two hands to support your print so that it doesn’t bend. A crease in the print will be permanent.

• Don’t use your hands to wipe off any dust, as this can scratch the printed area. Never blow on the print to remove dust - even the tiniest amount of moisture can affect the paper. If necessary you (or the framer) can use compressed air for dust removal.

• Never place the artwork print-side-down on any surface. This can cause permanent scuff marks.

• Keep your print away from direct bright light and humid environments.

Tips for Flattening Prints

• Find a flat, clean surface. Ensure your hands are clean/dry.

• Using two hands, unroll the print and place it print-side-up on the flat surface.

• With the sheeting protecting the printed area, place a few smooth, flat heavy objects on the ends of the print. Leave for a few hours.

• Remove objects and if your print is still not flat, replace and leave for another couple of hours.

• Very important: never roll the print in the opposite direction. This will damage the paper and the pigment.

• If re-rolling your print, always roll it so the printed side faces out (as it was initially rolled). This follows the natural curl of the paper.